4
DR MODE <ADVANCED>
4-24
Repeater list programming (Continued)
■
5.
Gateway repeater call sign programming
The 8th digit in the call sign, programmed in [4. Re-
peater call sign programming] as described above,
is automatically set to “G” as the gateway port. And
you can skip this setting and go to the next item.
If you need to change it, follow the steps, as de-
scribed below.
@2
Push D-pad(
) to select “GW CALL SIGN,” and
then push D-pad(Ent) to enter the gateway repeater
call sign edit mode.
@3
Rotate [DIAL] to select the first character.
• A to Z, 0 to 9, / and a space can be selected.
• A space can be selected, even for any input mode se
-
lected.
• Push [CLR]
to erase the selected character, or hold
down [CLR]
to continuously erase the characters
after the cursor.
@4
Push D-pad(
"
) to move the cursor to the second
digit.
@5
Repeat steps
@3
and
@4
to enter a name of up to 8
characters, including spaces.
• The 8th digit in the gateway repeater call sign is set to
only “G” or a space.
@6
After entering the gateway repeater call sign, push
D-pad(Ent).
Repeater group confirmation
6.
In this item, you can confirm the repeater group that
is selected in [1. Repeater group selection]. And you
can skip this setting and go to the next item.
If necessary, you can change the repeater group.
@7
Push D-pad(
) to select “GROUP,” and then push
D-pad(Ent) to enter the repeater group selection
mode.
@8
Push D-pad(
) to select the desired repeater group
(01 to 20), and then push D-pad(Ent).
• The selected repeater group is displayed on the RE
-
PEATER LIST EDIT screen.
Example:
“JP1YYY G” is
entered.
Previous view
