![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369008.webp)
1
REPEATER AND DUPLEX OPERATIONS
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
1-5
D
Setting the duplex direction
Push [V/MHz]
q
to select the VFO mode.
Push [FM/DV]
w
several times to select the FM
mode.
Rotate [DIAL] to set the operating frequency.
e
Push
r
.
Push D-pad(
t
) to select “DUP,” and then push D-
pad(Ent).
Push D-pad(
y
) to select “DUP–” (negative offset) or
“DUP+” (positive offset), and then push D-pad(Ent).
• OFF : For simplex operation (the receive and transmit
frequencies are the same).
•
–
DUP : The transmit frequency shifts down from the re-
ceive frequency by the offset amount.
• +DUP : The transmit frequency shifts up from the receive
frequency by the offset amount
■
Off band indication
If the transmit frequency is out of the amateur band,
the off band indication, “OFF,” appears on the display
when [PTT] is pushed. Check the frequency offset (p.
1-4) or duplex direction (see above) in this case.
D-pad
(
�
)
(Ent)
Previous view