![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369146.webp)
8
SCAN OPERATION
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
8-3
D
Squelch setting for a scan
The squelch level can be changed to suit your operat-
ing style. Set the squelch level to open the squelch,
according to the received signal strength.
The default squelch level is “AUTO.”
• During a scan, while holding down [SQL], and then
rotate [DIAL] to adjust the squelch level. Release
[SQL] to restart the scan.
D
Scanning direction
• If desired, rotate [DIAL] to switch the scanning direc
-
tion during a scan.
• When a signal is received, the scan pauses. Rotate
[DIAL] to resume the scan.
D
Tuning step for a VFO scan
The selected tuning step is applied to the scan.
D
Skip function
The skip function speeds up scanning by not scanning
those frequencies set as skip channels.
D
Receive mode for a scan
• The selected receive mode is used by the scan.
• During a memory or bank scan, the receive mode
programmed into the channel is used by the scan.
D
When a signal is received
When a signal is received, the scan pauses for ap-
proximately 10 seconds (default).
The scan resumes approximately 2 seconds after the
signal is disappears.
• These settings can be changed in the MENU screen.
(MENU > Scan >
Pause Timer
)
(MENU > Scan >
Resume Timer
)
D
Scan name
A desired name can be assigned to each PROGRAM-
CH (**A/**B). (p. 7-10)
By selecting the scan name, the scanning frequency
range will be set.
D
Scan Stop Beep function
The Scan Stop Beep function sounds a beep when a
signal is received.
The function can be turned ON in the MENU screen.
(p. 10-62)
(MENU > Sounds >
Scan Stop Beep
)
When the “PROGRAM SKIP” item is set to OFF, the
Scan Skip function cannot be used. (p. 10-14)
(MENU > Scan >
Program skip
)
Blinks
Blinks
Scanning in the FM mode
The S-meter shows the re-
ceived signal strength.
Blinks
Blinks
Scan name “SCAN1”
The scan type selecting screen.
Blinks
Blinks
Squelch level
Previous view