![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369043.webp)
4
DR MODE <ADVANCED>
4-2
■
Message operation
The transceiver has a total of 5 message memories
to store short messages to transmit during DV mode
operation. Messages of up to 20 characters can be
programmed in each memory.
D
TX message programming
TX messages of up to 20 characters can be pro-
grammed in each of the 5 message memories.
Example:
To program “JAPAN >TOM” into message
memory number 1.
Push [MENU]
q
.
Push D-pad(
w
) to select the root item (“My Station”),
and then push D-pad(Ent).
D-pad
(
�
)
(Ent)
Push D-pad(
e
) to select “TX Message,” and then
push D-pad(Ent).
Push D-pad(
r
) to select message memory number
“1.”
Push
t
.
Push D-pad(
y
) to select “Edit.”
Push D-pad(Ent) to enter the TX message edit
u
mode.
Rotate [DIAL] to select a desired character.
i
• The selected character blinks.
• Push D-pad(
) to move the cursor right or left.
• While selecting a character, push
to change the
character to a upper case or lower case letter.
• While selecting a digit, push
to open the input mode
selection window.
Push D-pad(
) to select the desired modes to Upper
case letters, Lower case letters, Numbers and Symbols.
To enter symbols, select “!”#,” and then push D-pad(Ent)
to display the symbol character selection window. And
rotate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
• A space can be selected, even for any input mode se
-
lected.
• Push D-pad(
"
) to enter a space to the right of the last
character.
To insert a space to the left of any selected character,
rotate [DIAL] to select a space to insert it.
• Push [CLR]
to erase the selected character, or hold
down [CLR]
to continuously erase the characters
after the cursor.
Push D-pad(
o
"
) to move the cursor to the second
digit.
!0
Repeat steps
i
and
o
to enter up to 20 characters,
including spaces.
!1
After entering the message, push D-pad(Ent) one or
more times.
!2
Push [MENU]
to exit the MENU screen.
“JAPAN” and a
space are entered.
Character type
selection screen
Symbol type
is selected
To input “>,”
[>] is selected
in the symbol
list screen.
“JAPAN >TOM”
is entered.
Previous view