4
DR MODE <ADVANCED>
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
4-17
■
Digital squelch functions
The digital squelch opens only when receiving a sig-
nal addressed to your own call sign, or a signal that
includes a matching digital code. You can silently wait
for calls from others.
D
The digital call sign squelch setting
Hold down
q
for 1 second.
• The DR mode is selected.
•
To use the digital call sign squelch function in another
mode, push [V/MHz]
or [M/CALL]
to select the
VFO, Memory or CALL channel mode.
Push
w
.
Push D-pad(
e
) to select “DSQL,” and then push D-
pad(Ent).
Push D-pad(
r
) to select “DSQL
S
” or “DSQL.”
• DSQL
S
: Turn ON the digital call sign squelch pocket
beep.
• DSQL
: Turn ON the digital call sign squelch.
Push D-pad(Ent) to set the digital call sign squelch,
t
and then exit the Quick menu screen.
• “SQL” appears
.
• “DSQL
S
” or “DSQL” appears when the VFO, Memory
or CALL channel mode is selected.
y
When the received signal includes a matching call
sign, the squelch opens and the audio is heard.
• When the received signal’s call sign does not match,
digital call sign squelch does not open; however, the S/
RF meter shows the received signal level.
NOTE:
•
DO NOT
use the digital code squelch function when
communicating with two or more stations, because
the digital call sign squelch function opens only
when receiving a signal addressed to your own
call sign. Thus the digital call sign squelch function
can be used when communicating with only one
station.
•
While operating in the low-speed data communica-
tion mode, the digital squelch opens even if receiv-
ing a signal is not addressed to your own call sign.
D
Pocket beep function with the digital
call sign squelch
When a received signal is addressed to your own call
sign, the transceiver emits beep tones for 30 seconds
(other than in the DR mode, in which “
S
” blinks).
Push [PTT] to answer, or push D-pad(Ent) to stop
➥
the beeps or “
S
” blinking.
* Except for the DR mode, “
S
” disappears.
If no operation is performed for 30 seconds, the beep
tones automatically stops (other than the DR mode, in
which “
S
” continues to blink to inform you of a call).
Beep,
Beep,
Beep...
Appears
When “DSQL
S
” or “DSQL” is selected in
the VFO, Memory or CALL channel mode.
• When “DSQL
S
” is selected
D-pad
(
�
)
(Ent)
Previous view
