manualshive.com logo in svg

Icom D-STAR ID-31A; D-STAR ID-31E, Advanced Instructions, Page: 236 / 293

Share
Download
Icom D-STAR ID-31A; D-STAR ID-31E Advanced Instructions Download Page 236

10

MENU SCREEN OPERATION

10

10-49

 

■

SPEECH items

RX Call Sign SPEECH 

(Default: ON (Kerchunk))

SPEECH > RX Call Sign SPEECH(RX CALL SIGN SPEECH)

Turn the RX call sign speech function ON or OFF.

• OFF 

:  No announcement is made even when a call is received. 

• ON (Kerchunk) :  The calling station's call sign is announced only when it 

makes a short transmission.

• ON (All) 

:  The calling station's call sign is always announced.

RX>CS SPEECH 

(Default: ON)

SPEECH > RX>CS SPEECH(RX>CS SPEECH)

Turn the RX>CS Speech function ON or OFF.
The RX>CS Speech function enables the transceiver to announce the sta-
tion call sign that is selected from a Received Call Record by using 

 

and [DIAL].

• OFF 

:  The station call sign is not announced.  

• ON 

:  The station call sign is announced.

Procedure

 

:  

While holding down 

, rotate [DIAL] to select a call sign 

from a Received Call Record. After selecting, release 

, 

and then the selected station call sign is announced.

SPEECH Language 

(Default: English)

SPEECH > SPEECH Language(SPEECH LANGUAGE)

Set the desired speech pronunciation to English or Japanese.

Alphabet 

(Default: Normal)

SPEECH > Alphabet(ALPHABET)

Select either “Normal” or “Phonetic Code” to announce the alphabet char-
acter.

• Normal 

:   Normal code is used. (for example: A as eh, B as bee) 

• Phonetic Code  :   Phonetic  code  is  used.  (for  example:  A  as  Alfa,  B  as 

Bravo)

SPEECH Speed 

(Default: Fast)

SPEECH > SPEECH Speed(SPEECH SPEED)

Set the speech speed to Low (slow) or High (fast).

SPEECH Level 

(Default: 7)

SPEECH > SPEECH Level(SPEECH LEVEL)

Enter a volume level number between 0 (OFF), 1 (minimum) and 9 (maxi-
mum) for the voice synthesizer.
The voice synthesizer audio output level from the speaker is linked with 
[VOL] setting from the minimum audio volume up to the set level. 

Previous view

Summary of Contents for D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Reviews:

No comments