![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369041.webp)
3
DR MODE <BASIC>
3-24
•
Settings for
“
UR
”
and
“
R2,
”
depending on the type of call you wish to make
Destination: CQ
Destination: An individual station
<Call type: Local area call>
CQ
• UR setting : CQCQCQ
• R2 setting : NOT USE
✱
<Call type: Local area call>
• UR setting : An individual station
• R2 setting : NOT USE
✱
<Call type: Gateway call>
CQ
• UR setting : Destination repeater to call CQ
• R2 setting : Your gateway repeater
<Call type: Gateway call sign routing call>
• UR setting : An individual station
• R2 setting : Your gateway repeater
NOTE:
The R1 setting is set to your access repeater’s call sign.
Calling
5.
!9
While holding down [PTT], speak into the micro-
phone at your normal voice level.
• The TX/RX indicator lights red.
• The S/RF meter shows the transmit output power level.
@0
Release [PTT] to receive.
Information
✓
After setting, hold down [S.MW]
for 1 second to
enter the Select Memory write mode, and then rotate
[DIAL] to select a desired memory channel.
Hold down [S.MW]
for 1 second to save this pro-
grammed data into the channel.
Shows the transmit
output power level
For your reference
■
Making a Local Area call or Gateway call in the VFO mode (Continued)
D
Shows it is a
repeater des-
tination call
Hirano430 call sign
scrolls with “/.”
Previous view