Icom D-STAR ID-31A; D-STAR ID-31E Page 213 Advanced Instructions Download

Page: 213 / 293

MENU SCREEN OPERATION

10-26

GPS items (Continued)

■

GPS Information

GPS > GPS Information(GPS INFO)

Displays the GPS satellite direction, elevation, satellite number and receiv-
ing status.

Example: tracking 4 satellites



Non tracking satellites

Regular characters
(Example: 01)

Tracking satellites (weak signal)

Reversed characters
(Example:

)

Tracking satellites (strong signal)

SAT

Number of tracking satellite (between 0 and 12)

Altitude

------ft (Non-positioning / 2D (Tracking three satellite) /
Positioning results (4 or more satellite tracking)

Latitude

--°--.--'-(Non-positioning)/Positioning results

Longitude

---°--.--'-(Non-positioning)/Positioning results

NOTE:

The default settings, shown below, are for the USA version.

The default settings may differ, depending on the version.

Previous view

Summary of Contents for D-STAR ID-31A; D-STAR ID-31E






































































































































































































































































































Search results

Summary of Contents for D-STAR ID-31A; D-STAR ID-31E

Reviews:

Related manuals for D-STAR ID-31A; D-STAR ID-31E

Brands by name

Popular brands

Icom D-STAR ID-31A; D-STAR ID-31E, Advanced Instructions

Search results

Summary of Contents for D-STAR ID-31A; D-STAR ID-31E

Reviews:

Related manuals for D-STAR ID-31A; D-STAR ID-31E

Brands by name

Popular brands