![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369067.webp)
4
DR MODE <ADVANCED>
4-26
Repeater list programming (Continued)
■
9. Duplex direction setting
• This item appears only when “YES” is selected in
[7. Access repeater setting].
• “DUP
–
” is automatically set when the access re-
peater frequency is programmed in [8. Access re-
peater frequency programming].
• If necessary, you can change the duplex direction.
#6
Push D-pad(
) to select “DUP,” and then push D-
pad(Ent).
#7
Push D-pad(
) to select the duplex direction.
• OFF : Turn the duplex function OFF.
For a simplex operation, this item MUST be set
to “OFF.”
• DUP– : The transmit frequency shifts down from the re
-
ceive frequency by the offset amount.
• DUP+ : The transmit frequency shifts up from the re
-
ceive frequency by the offset amount.
#8
After setting, push D-pad(Ent).
10. Frequency offset programming
• This item appears only when “YES” is selected in
[7. Access repeater setting].
• The offset value* is automatically set when the ac
-
cess repeater frequency is programmed in [8. Ac-
cess repeater frequency programming].
*The default value is differ depending on the version.
• If necessary, you can change the frequency off
-
set.
#9
Push D-pad(
) to select “OFFSET FREQ,” and then
push D-pad(Ent) to enter the frequency offset edit
mode.
• A cursor appears and blinks.
$0
Rotate [DIAL] to input the frequency offset.
$1
Push to move the cursor backward, or push to
move the cursor forward.
$2
Repeat steps
$0
and
$1
to enter the frequency off-
set.
$3
After entering, push D-pad(Ent).
11.
Position data accuracy level setting
When the Repeater Search function is not used, or
the distance between your position and a repeater
is not displayed, select “OFF.”
$4
Push D-pad(
) to select “POSITION,” and then
push D-pad(Ent).
$5
Push D-pad(
) to select the position data accuracy
level.
• None
: Select when the repeater has no position
data.
• Approximate : Select when the programmed position
data is approximate.
• Exact
: Select when the programmed position
data is exactly correct.
$6
After setting, push D-pad(Ent).
Previous view