![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369151.webp)
8
SCAN OPERATION
8-8
D
Memory bank scan
A memory bank scan searches through the memory
channels in the selected bank.
• Two or more memory channels, which are not set
as skip channels, must be programmed into start a
memory bank scan.
• When the “BANK” item in the MENU screen is set to
“OFF,” a bank scan is not started.
Push [M/CALL]
q
to select the memory mode.
Hold down [FM/DV]
w
for 1 second.
Push D-pad (
e
) to select the scan type.
• ALL
: Full bank scan
• BANK-LINK : Bank link scan
• BANK-A to Z : Bank scan
( Only banks which contain a memory
channel are displayed.)
• DUP
: Duplex scan (p. 8-2)
(For the duplex mode)
• TONE
: Tone scan
(For tone scanning)
Push D-pad(Ent) to start the scan.
r
To cancel the scan, hold down [SCAN]
t
for
1 second.
• Pushing [CLR]
also cancels the scan.
NOTICE
• The bank contains only channels which are set as
“SKIP” or “PSKIP” is skipped.
• When the all selected banks contain only channels
which are set as “SKIP” or “PSKIP,” the scan is not
started.
Hold down [SCAN]
for
1 second.
Push D-pad(Ent).
When a signal is received.
Blinks
Blinks
Blinks
Bank channel
Blinks
The S-meter shows the re-
ceived signal strength.
CONVENIENCE!
Holding down [SCAN]
and rotate [DIAL] also se-
lects the scan type. The scan immediately starts
when [SCAN]
is released.
D-pad
(
�
)
(Ent)
Previous view