5
GPS/GPS-A OPERATION
5-26
GPS Logger function
■
(Continued)
D
Turning ON the GPS Logger function
Turn the GPS logger function ON or OFF, to store your
route as you move.
When the GPS Logger function is set to ON, the trans-
ceiver stores the position data from GPS receiver into
microSD card in a specified time interval.
While using the Internal GPS receiver only four GPS
sentences, GGA, RMC, GSA and VTG, are used.
Push [MENU]
q
.
Push D-pad(
w
) to select the root item (GPS), and
then push D-pad(Ent) to go to the next screen.
D-pad
(
�
)
(Ent)
(MENU > GPS > GPS Logger >
GPS Logger
Refer to the menu sequence shown directly above,
e
and push D-pad(
) to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad(
r
) to select “ON.”
Push [MENU]
t
to exit the Menu screen.
• The GPS Logger starts.
D
Setting the GPS record interval
For example, when you are walking and if the time in-
terval is set to “1sec,” a lot of position data is stored at
almost same place. Select the GPS Logger function
record interval to suit your travel speed.
Push [MENU]
q
.
Push D-pad(
w
) to select the root item (GPS), and
then push D-pad(Ent) to go to the next screen.
D-pad
(
�
)
(Ent)
(MENU > GPS > GPS Logger >
Record Interval
e
Refer to the menu sequence shown directly above
and push D-pad(
) to select, and then D-pad(Ent)
to enter, one or more times until the last screen is
displayed.
Push D-pad(
r
) to select a desired record interval.
• Selectable settings are 1, 5, 10, 30 or 60seconds.
Push [MENU]
t
to exit the Menu screen.
Select “GPS Logger.”
*
NOTE:
While using the external GPS receiver, uses only the
compatible GGA, RMC, GSA and VTG sentences.
* To use the GPS logger function with the transceiver
in the Sleep mode, the transceiver has an exclusive
mode that is used only the GPS Logger function.
See page 5-29 for details of the “GPS Logger Only”
item.
GPS LOGGER
screen
RECORD INTERVAL
screen
Previous view
