![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369090.webp)
5
GPS/GPS-A OPERATION
5
5-9
GPS Memory name programming
2.
y
Push D-pad(
) to select “NAME.”
D-pad
(
�
)
(Ent)
u
Push D-pad(Ent), then the editing screen appears.
i
Rotate [DIAL] to select the first character.
• The selected character blinks.
• Push D-pad(
) to move the cursor right or left.
• While selecting a character, push
to change the
character to a upper case or lower case letter.
• While selecting a digit, push
to open the input mode
selection window.
Push D-pad(
) to select the desired modes to Upper
case letters, Lower case letters, Numbers and Symbols.
To enter symbols, select “!”#,” and then push D-pad(Ent)
to display the symbol character selection window. And
rotate [DIAL] to select the desired symbol character, and
then push D-pad(Ent).
• A space can be selected, even for any input mode se
-
lected.
• Push D-pad(
"
) to enter a space to the right of the last
character.
To insert a space to the left of any selected character,
rotate [DIAL] to select a space to insert it.
• Push [CLR]
to erase the selected character, or hold
down [CLR]
to continuously erase the characters
after the cursor.
o
Push D-pad(
"
) to move the cursor to the second
digit.
!0
Repeat steps
i
and
o
to enter a GPS Memory
name of up to 16 characters, including spaces.
!1
After entering the name, push D-pad(Ent).
(Continued on the next page)
Character
type selection
screen
(Example)
When entering
"HOUSE."
Previous view