![background image](http://html2.mh-extra.com/html/icom/d-star-id-31a-d-star-id-31e/d-star-id-31a-d-star-id-31e_advanced-instructions_3494369147.webp)
8
SCAN OPERATION
8-4
■
VFO scan
There are 5 scan types: full scan, program scan, pro-
gram link scan, duplex scan and tone scan.
NOTE:
The frequencies that are set as skip channels
“PSKIP” are skipped during a scan.
When the “PROGRAM SKIP” item in the MENU screen
is set to OFF, the frequencies that are set as skip chan-
nels “PSKIP”, are not skipped during a scan.
D
VFO mode scan
Push [V/MHz]
q
to select the VFO mode.
Push [FM/DV]
w
to select the operating mode.
Hold down [SCAN]
e
for 1 second.
Push D-pad(
r
) to select the scan type.
• ALL
: Full scan.
• P-LINK0–9 : Program link scan.
• P00–24
: Program scan.
• DUP
: Duplex scan (p. 8-2).
(For the duplex mode)
• TONE
: Tone scan.
(For tone squelch scanning)
Push D-pad(Ent) to start the scan.
t
• If desired, rotate [DIAL] to switch the scanning direction
during a scan.
• If desired, push [FM/DV]
to change the operating
mode during a scan.
• If desired, hold down for 1 second [LOCK]
to turn
ON the Lock function during a scan.
To turn the function OFF, hold down [LOCK]
again
for 1 second.
• The scan resumes even while the MENU screen is dis
-
played.
To cancel the scan, hold down [SCAN]
y
for
1 second.
• Pushing [CLR]
also cancels the scan.
CONVENIENCE!
Holding down [SCAN]
and rotate [DIAL] also
selects the scan type. The scan immediately starts
when [SCAN]
is released.
Hold down [SCAN]
for 1 second.
Push D-pad(Ent).
Blinks
Blinks
Blinks
Blinks
e.g. The full scan in the FM mode.
When a signal is received.
The S-meter shows the re-
ceived signal strength.
[DIAL]
D-pad
(
�
)
(Ent)
Previous view