IBM z13s Technical Manual Download Page 379 | Manualshive

Page: 379 / 588

background image

Chapter 8. System upgrades

351

Processor identification

The following instructions are used to obtain processor information:

򐂰

The STSI instruction: STSI reports the processor model and model capacity identifier for
the base configuration and for any additional configuration changes through temporary
upgrade actions. It fully supports the concurrent upgrade functions and is the preferred
way to request processor information.

򐂰

The store CPU ID (STIDP) instruction: STIDP is provided for purposes of compatibility
with a previous version.

Store system information instruction

The STSI instruction returns the MCI for the permanent configuration, and the MCI for any
temporary capacity. This process is key to the functioning of CoD offerings.

Figure 8-17 shows the relevant output from the STSI instruction.

Figure 8-17 STSI output on z13s server

«
...
377
378
379
380
381
...
»

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

Brand: Yeong Yang Pages: 7

Brand: Devolinx Pages: 51

Brand: Hawking Pages: 40

Brand: Patton electronics Pages: 16

Power AC922 8335-GTW

Brand: IBM Pages: 70

ApplianceStor 15MT

Brand: Rasilient Pages: 30

Brand: d3 Technologies Pages: 10

Enterprise Server 33

Brand: Blackberry Pages: 207

LaCinema PlayHD

Brand: LaCie Pages: 2

Brand: Cisco Pages: 2

BizNAS D400 Series

Brand: Tandberg Data Pages: 2

Brand: IBM Pages: 16

Brand: SCT Pages: 33

Brand: Vitek Pages: 55

Brand: AirLive Pages: 180

Brand: Gigabyte Pages: 147

Brand: AERMEC Pages: 136

Brand: Oracle Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands