IBM z13s Technical Manual Download Page 437 | Manualshive

Page: 437 / 588

background image

Chapter 11. Hardware Management Console and Support Elements

409

11.5.4 HMC and SE microcode

The microcode for the HMC, SE, CPC, and zBX is included in the driver/version. The HMC
provides the management of the driver upgrade through Enhanced Driver Maintenance
(EDM). EDM also provides the installation of the latest functions and patches (Microcode
Change Levels (MCLs)) of the new driver.

When you perform a driver upgrade, always check the Driver xx Customer Exception Letter
option in the Fixes section at the IBM Resource Link.

For more information, see Appendix 9.4, “Enhanced Driver Maintenance” on page 360

.

Microcode Change Level

Regular installation of MCLs is key for reliability, availability, and serviceability (RAS), optimal
performance, and new functions:

򐂰

Install MCLs on a quarterly basis at a minimum.

򐂰

Review hiper MCLs continuously to decide whether to wait for the next scheduled fix
application session or to schedule one earlier if the risk assessment warrants.

Microcode terms

The microcode has these characteristics:

򐂰

The driver contains EC streams.

򐂰

Each EC stream covers the code for a specific component of z13s servers. It has a
specific name and an ascending number.

򐂰

The EC stream name and a specific number are one MCL.

򐂰

MCLs from the same EC stream must be installed in sequence.

򐂰

MCLs can have installation dependencies on other MCLs.

򐂰

Combined MCLs from one or more EC streams are in one bundle.

򐂰

An MCL contains one or more Microcode Fixes (MCFs).

Tip: The IBM Resource Link

a

provides access to the system information for your

z Systems according to the system availability data that is sent on a scheduled basis. It
provides more information about the MCL status of your z13s server. To access the
Resource Link, go to the following website:

http://www.ibm.com/servers/resourcelink

After you reach the Resource Link, click Tools

→

Machine Information, select your

z Systems server, and click EC/MCL.

a. Registration is required to access the IBM Resource Link.

«
...
435
436
437
438
439
...
»

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

Brand: D-Link Pages: 12

Power 750 Express

Brand: IBM Pages: 86

Azure StorSimple 8100

Brand: Microsoft Pages: 12

Brand: SEH Pages: 5

Brand: TYAN Pages: 106

Brand: Buffalo Pages: 2

Netfinity 4500R

Brand: IBM Pages: 60

Force10 MXL Blade

Brand: Dell Pages: 2

Brand: Artesyn Embedded Technology Pages: 2

Brand: Viavi Pages: 11

Brand: Mirapoint Pages: 98

Brand: Intel Pages: 70

Brand: Dell EMC Pages: 169

Netra SPARC S7-2

Brand: Oracle Pages: 102

Brand: Gigabyte Pages: 114

Brand: Xerox Pages: 266

Brand: Xerox Pages: 21

Brand: xFusion Digital Technologies Pages: 61

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands