IBM z13s Technical Manual Download Page 298 | Manualshive

Page: 298 / 588

background image

270

IBM z13s Technical Guide

Table 7-40 lists the minimum support requirements for OSA-Express5S 1000BASE-T.

Table 7-40 Minimum support requirements for OSA-Express5S 1000BASE-T Ethernet

7.3.44 OSA-Express4S 10-Gigabit Ethernet LR and SR

The

OSA-Express4S 10-Gigabit Ethernet

feature, introduced with the zEC12, is installed

exclusively in the PCIe I/O drawer. Each feature has one port, which is defined as either
CHPID type OSD or OSX. CHPID type OSD supports the QDIO architecture for high-speed
TCP/IP communication. The z196 introduced the CHPID type OSX. For more information,
see 7.3.50, “Intraensemble data network” on page 274.

The OSA-Express4S features have half the number of ports per feature when compared to
OSA-Express3, and half the size as well. This configuration results in an increased number of
installable features. It also facilitates the purchase of the correct number of ports to help
satisfy your application requirements and to better avoid redundancy.

Operating
system

Support requirements
using two ports per CHPID

Support requirements
using one port per CHPID

z/OS

OSC, OSD, OSE, and OSN

: z/OS

OSC, OSD, OSE, OSM, and OSN

z/VM

OSC, OSD

a

, OSE, and OSN

b

: z/VM

V6R2

a. PTFs are required.
b. Although CHPID type OSN does not use any ports (because all communication is LPAR to

LPAR), it is listed here for completeness.

OSC, OSD, OSE, OSM

, and OSN

z/VM V6R2

c. OSM support in V6R2 and V6R3 for dynamic I/O only.

z/VSE

OSC, OSD, OSE, and OSN

: z/VSE

V5R1

OSC, OSD, OSE, and OSN

: z/VSE V5R1

z/TPF

OSD, OSC, OSN

: z/TPF V1R1

OSD, OSC, OSN

IBM
zAware

OSD

OSD

Linux on z
Systems

OSD:
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

OSD:
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

OSM:
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11 SP2
Red Hat RHEL 7
Red Hat RHEL 6

SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

«
...
296
297
298
299
300
...
»

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

eserver pSeries 690

Brand: IBM Pages: 142

eServer 370 xSeries

Brand: IBM Pages: 218

BladeCenter PS703

Brand: IBM Pages: 298

BladeCenter T Type 8720

Brand: IBM Pages: 180

Brand: SEH Pages: 50

Brand: Omega Pages: 16

NSLU2 - Network Storage Link NAS Server

Brand: Linksys Pages: 64

UniServer BT716F

Brand: H3C Pages: 44

Brand: PRIMERGY Pages: 87

Netfinity Series

Brand: IBM Pages: 44

FusionServer G8600 V7

Brand: xFusion Digital Technologies Pages: 112

Brand: Brocade Communications Systems Pages: 176

Brand: IBM Pages: 75

Brand: Axis Pages: 85

AlphaServer ES47

Brand: HP Pages: 76

AlphaServer GS80

Brand: HP Pages: 88

Brand: HP Pages: 39

16/18-Port Cable Management Kit

Brand: HP Pages: 14

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands