manualshive.com logo in svg

IBM z13s, Technical Manual

Looking for a comprehensive Technical Manual for your IBM z13s? Look no further! Download the user manual for free from our website and get all the detailed information you need to optimize your usage of this cutting-edge product. Experience seamless performance with the IBM z13s, available for download at manualshive.com.

Share
Download
background image

238

 

IBM z13s Technical Guide

Parallel Sysplex and other

Server Time Protocol (STP)

Y

Y

Y

Y

-

-

Coupling over InfiniBand CHPID type 
CIB

Y

Y

Y

Y

N

N

InfiniBand coupling links 12x at a 
distance of 150 m (492 ft.)

Y

Y

Y

Y

N

N

InfiniBand coupling links 1x at an 
unrepeated distance of 10 km (6.2 
miles)

Y

Y

Y

Y

N

N

CFCC Level 21

Y

Y

Y

Y

Y

Y

CFCC Level 21 Flash Express usage

Y

Y

Y

N

N

N

CFCC Level 21 Coupling Thin Interrupts

Y

Y

Y

Y

N

N

CFCC Level 21 Coupling Large Memory 
support

Y

Y

Y

Y

N

N

CFCC 21 Support for 256 Coupling 
CHPIDs

Y

Y

Y

Y

N

N

IBM Integrated Coupling Adapter (ICA)

Y

Y

Y

Y

N

N

Dynamic I/O support for InfiniBand and 
ICA CHPIDs

-

-

-

-

Y

Y

 IBM z/OS Resource Measurement 
Facility (RMF) coupling channel 
reporting 

Y

Y

Y

Y

N

N

a. PTFs might be required for toleration support or use of z13s functions and features.
b. Hardware limit of 6 CP and 2zIIP:1CP ratio.
c. With SMT, 40 threads.
d. zAware V2.0, Linux Guest support.
e. 4 TB of real storage is supported with PTF for APAR OA47439.
f. PTF support required and with RSM enabled web delivery.
g. Packed decimal conversion support.
h. PTF support required.
i. On z13s servers, the CHPID statement of HiperSockets devices requires the keyword VCHID, 

so the z13s IOCP definitions need to be migrated to support the HiperSockets definitions 
(CHPID type IQD). VCHID specifies the virtual channel identification number associated with 
the channel path. Valid range is 7E0 - 7FF. VCHID is not valid on z Systems before z13s 
servers.

j. For guest exploitation only.
k. Dynamic I/O support only.

Function

z/OS 
V2 R2

z/OS
V2 R1

z/OS 
V1R13

z/OS
V1R12

z/VM
V6R3

z/VM
V6R2

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

IBM Power 720 Express 8202-E4B Installation Manual preview
Power 720 Express 8202-E4B
Brand: IBM Pages: 64
IBM PS700 Technical Overview And Introduction preview
PS700
Brand: IBM Pages: 148
IBM 5104-22C Manual preview
5104-22C
Brand: IBM Pages: 36
IBM AS/400e User Handbook Manual preview
AS/400e
Brand: IBM Pages: 834
Supermicro 7044H-T User Manual preview
7044H-T
Brand: Supermicro Pages: 118
Supermicro SuperServer 1029U-T Series Quick Reference Manual preview
SuperServer 1029U-T Series
Brand: Supermicro Pages: 1
Seyeon FW3150 User Manual preview
FW3150
Brand: Seyeon Pages: 10
AIC HA201-AP User Manual preview
HA201-AP
Brand: AIC Pages: 64
Intel S7000FC4UR - Server System - 0 MB RAM Configuration Manual preview
S7000FC4UR - Server System - 0 MB RAM
Brand: Intel Pages: 13
MRV Communications LX-4000 Series Getting Started preview
LX-4000 Series
Brand: MRV Communications Pages: 65
IBM 8678 Installation And User Manual preview
8678
Brand: IBM Pages: 96
H3C UniServer R4300 G6 User Manual preview
UniServer R4300 G6
Brand: H3C Pages: 542
Edimax Past Ethernet Combo Print Server PS-1216U Quick Installation Manual preview
Past Ethernet Combo Print Server PS-1216U
Brand: Edimax Pages: 23
Supermicro SuperServer 2029BT-HNC0R User Manual preview
SuperServer 2029BT-HNC0R
Brand: Supermicro Pages: 148
NEC 320Fd Service Manual preview
320Fd
Brand: NEC Pages: 10
NEC 5800 Series Product Manual preview
5800 Series
Brand: NEC Pages: 20
NEC 320Lc EXP356F Getting Started Manual preview
320Lc EXP356F
Brand: NEC Pages: 2
NEC 120Rj-2 Configuration Manual preview
120Rj-2
Brand: NEC Pages: 18

Brands by name

Popular brands

Load more brands