IBM z13s Technical Manual Download Page 310 | Manualshive

Page: 310 / 588

background image

282

IBM z13s Technical Guide

This data can then be forwarded to z/OS tools for easier problem determination and
resolution.

The Network Traffic Analyzer is supported by the OSA-Express5S and OSA-Express4S
features on z13s when in QDIO mode (CHPID type OSD). It is used by z/OS V1R12 and later.

7.3.71 Program-directed re-IPL

First available on System z9, program directed re-IPL allows an operating system on a z13s
to re-IPL without operator intervention. This function is supported for both SCSI and IBM
extended count key data (IBM ECKD™) devices. Table 7-52 lists the minimum support
requirements for program directed re-IPL.

Table 7-52 Minimum support requirements for program directed re-IPL

7.3.72 Coupling over InfiniBand and Integrated Coupling Adapter

InfiniBand (IFB) and ICA using PCIe Gen3 technology can potentially provide high-speed
interconnection at short distances, longer distance fiber optic interconnection, and
interconnection between partitions on the same system without external cabling. For more
information, see 4.9, “Parallel Sysplex connectivity” on page 174.

Integrated Coupling Adapter

Support for PCIe Gen3 fanout (also known as Integrated Coupling Adapter Short Range (ICA
SR)) that supports a maximum distance of 150 meters (492 feet) is listed inTable 7-53.

Table 7-53 Minimum support requirements for coupling links over InfiniBand

Operating system

Support requirements

z/VM

z/VM V6R2

Linux on z Systems

SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

z/VSE

V5R1 on SCSI disks

Operating system

Support requirements

z/OS

z/OS V1R12

z/VM

z/VM V6R2 (dynamic I/O support for ICA CHPIDs only; coupling
over ICA is not supported for guest use.)

z/TPF

z/TPF V1R1

«
...
308
309
310
311
312
...
»

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

Brand: Sun Fire Pages: 66

x3100 M5 Type 5457

Brand: IBM Pages: 688

Brand: Hologic Pages: 30

Brand: Sun Microsystems Pages: 90

Brand: Autonomic Pages: 17

Brand: DNP Pages: 2

Brand: Yawarra Pages: 4

Sun Fire Netra 1280

Brand: Sun Microsystems Pages: 10

UniServer R4300 G6

Brand: H3C Pages: 542

Brand: Cisco Pages: 2

StorCenter Pro NAS 200rL

Brand: Iomega Pages: 2

Brand: Inventec Pages: 129

Brand: PROXMOX Pages: 2

Brand: RoviSys Pages: 146

Brand: 3onedata Pages: 3

Brand: Mozaex Pages: 66

AS1021M-UR Plus

Brand: Supero Pages: 104

Brand: Supero Pages: 102

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands