IBM z13s, Technical Manual

Page: 182 / 588

154
IBM z13s Technical Guide
Fanout features that are supported by the z13s server are shown in Table 4-5. The table
provides the feature type, feature code, and information about the link that is supported by the
fanout feature.
Table 4-5 Fanout summary
4.7 I/O features (cards)
I/O features (cards) have ports
4
to connect z13s servers to external devices, networks, or
other servers. I/O features are plugged into the PCIe I/O drawer, based on the configuration
rules for the server. Different types of I/O cards are available, one for each channel or link
type. I/O cards can be installed or replaced concurrently.
In addition to PCIe I/O features, FICON Express8 features can be installed in I/O drawers.
z13s servers support a maximum of one I/O drawers as carry-forward during an MES. This
drawer represents a maximum of 8 FICON Express8 features (a total of 32 FICON Express8
ports) that can be carried forward.
Fanout feature Feature
code Use Cable
type
Connector
type Maximum
distance Link data
rate
a
a. The link data rates do not represent the actual performance of the link. The actual performance is dependent upon
many factors that include latency through the adapters, cable lengths, and the type of workload.
HCA2-C 0162 Connect to I/O
drawer Copper N/A 3.5 m
(11.48 ft) 6 GBps
PCIe fanout 0173 Connect to
PCIe I/O
drawer Copper N/A 4 m (13.1 ft) 16 GBps
HCA3-O
(12xIFB) 0171 Coupling link 50-µm MM
OM3 (2000
MHz-km) MPO 150 m (492 ft) 6 GBps
b
b. When using the 12x IFB3 protocol, synchronous service times are 40% faster than when you use the 12x IFB
protocol.
HCA3-O LR
(1xIFB) 0170 Coupling link 9-µm SM LC Duplex 10 km
(6.2 miles)
100 km
c
(62 miles)
c. With z Systems qualified DWDM.
5.0 Gbps
2.5 Gbps
d
d. Auto-negotiated, depending on the DWDM equipment.
ICA SR 0172 Coupling link OM4 MTP 150 m (492 ft) 8 Gbps
OM3 MTP 100 m (328 ft) 8 Gbps
4
Certain I/O features do not have external ports, such as Crypto Express5S and zEDC
Consideration: The installation of an I/O drawer limits the LPAR storage to 1 TB
(independent from the IOCP definition). Moreover,
each
I/O drawer affects the
configuration as follows:
򐂰 The total fanout slots for PSIFB are reduced by two.