manualshive.com logo in svg

IBM z13s, Technical Manual

Looking for a comprehensive Technical Manual for your IBM z13s? Look no further! Download the user manual for free from our website and get all the detailed information you need to optimize your usage of this cutting-edge product. Experience seamless performance with the IBM z13s, available for download at manualshive.com.

Share
Download
background image

464

 

IBM z13s Technical Guide

The first iteration of this work requires you to mark each message to be ignored on a per 
system basis. That is, for each message that you want to ignore, you must mark that 
particular message on each system for which IBM zAware is to ignore the message. You can 
choose from one of two types of ignore message: Until the next training period occurs 
(automatic or manual train) or Forever. 

B.3.4  IBM zAware graphical user interface

IBM zAware creates XML data with the status of the z/OS, Linux image, and details about the 
message traffic. This data is rendered by the web server that runs as a part of IBM zAware. 
The web server is available by using a standard web browser (Internet Explorer or Mozilla 
Firefox).

IBM zAware provides an easy-to-use, browser-based GUI with relative weighting and color 
coding. For IBM messages, IBM zAware GUI has a link to the message description that often 
includes a corrective action for the issue that is highlighted by the message.

B.3.5  IBM zAware complements your existing tools

Compared to existing tools, IBM zAware works with relatively little customization. It does not 
depend on other solutions or manual coding of rules, and is always enabled to watch your 
system. The XML output that is created by IBM zAware is consumed by existing system 
monitoring tools, such as IBM Tivoli OMEGAMON XE for z/OS and IBM Tivoli NetView® for 
z/OS, by using published APIs.

B.4  IBM zAware prerequisites

This section describes the hardware and software requirements for IBM zAware.

B.4.1  IBM zAware features and ordering

IBM zAware is available with IBM z13s, IBM z13, IBM EC12 (zEC12), and BC12 (zBC12) 
models. 

IBM zAware Version 2: IBM zAware Version 2 partition is not supported on hardware 
earlier than z13. DR configuration must use same generation HW (z13/z13s) for primary 
and DR IBM zAware host.

IBM zAware partition is not supported on a CPC running in Dynamic Partition Manager

 

(

DPM) Mode. For more information, see Appendix E, “IBM Dynamic Partition Manager” on 

page 499.

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

F5 VIPRION 2400 Platform Manual preview
VIPRION 2400
Brand: F5 Pages: 72
ASROCK Rack 4U60L Series User Manual preview
4U60L Series
Brand: ASROCK Rack Pages: 51
t.a.c. TAC Xenta 511 Handbook preview
TAC Xenta 511
Brand: t.a.c. Pages: 36
IBM eServer xSeries 205 Type 8480 Hardware Maintenance Manual And Troubleshooting Manual preview
eServer xSeries 205 Type 8480
Brand: IBM Pages: 168
FS 139690 Quick Start Manual preview
139690
Brand: FS Pages: 91
HPE ProLiant DL380 Gen9 Product End-Of-Life Disassembly Instructions preview
ProLiant DL380 Gen9
Brand: HPE Pages: 8
QNAP TS 77 Series User Manual preview
TS 77 Series
Brand: QNAP Pages: 69
ioCorp ProEdge-A100 thin client Installation Manual preview
ProEdge-A100 thin client
Brand: ioCorp Pages: 30
Black Box LS4103A User Manual preview
LS4103A
Brand: Black Box Pages: 46
Gigabyte G481-HA0-00 Assembly Notice preview
G481-HA0-00
Brand: Gigabyte Pages: 21
Mirapoint 7700 Series Hardware Manual preview
7700 Series
Brand: Mirapoint Pages: 76
Sugon I620-G20 User Manual preview
I620-G20
Brand: Sugon Pages: 155
QNAP GM-1000 User Manual preview
GM-1000
Brand: QNAP Pages: 53
Adaptec Storage Manager User Manual preview
Storage Manager
Brand: Adaptec Pages: 188
Lantronix MSS Reference Manual preview
MSS
Brand: Lantronix Pages: 93
Avere FXT 5000 Series Field Service Manual preview
FXT 5000 Series
Brand: Avere Pages: 48
Gateway E-9220T User Manual preview
E-9220T
Brand: Gateway Pages: 124
iCanTek iCanServer440R User Manual preview
iCanServer440R
Brand: iCanTek Pages: 47

Brands by name

Popular brands

Load more brands