IBM z13s Technical Manual Download Page 300 | Manualshive

Page: 300 / 588

background image

272

IBM z13s Technical Guide

7.3.46 OSA-Express4S 1000BASE-T Ethernet

The

OSA-Express4S 1000BASE-T Ethernet

feature is installed exclusively in the PCIe I/O

drawer. Each feature has one PCIe adapter and two ports. The two ports share a CHPID,
which is defined as OSC, OSD, OSE, OSM, or OSN. The ports can be defined as a spanned
channel, and can be shared among LPARs and across logical channel subsystems. The OSM
CHPID type was introduced with z196. For more information, see 7.3.49, “Intranode
management network” on page 274.

Each adapter can be configured in the following modes:

򐂰

QDIO mode, with CHPID types OSD and OSN

򐂰

Non-QDIO mode, with CHPID type OSE

򐂰

Local 3270 emulation mode, including OSA-ICC, with CHPID type OSC:

– OSA-ICC (OSC Channel) supports Secure Sockets Layer on z13s and z13 Driver 27

servers

– Up to 48 secure sessions per CHPID (the overall maximum of 120 connections is

unchanged)

򐂰

Ensemble management, with CHPID type OSM

Operating system support is required to recognize and use the second port on the
OSA-Express4S 1000BASE-T feature. Table 7-43 lists the minimum support requirements for
OSA-Express4S 1000BASE-T.

Table 7-43 Minimum support requirements for OSA-Express4S 1000BASE-T Ethernet

Linux on z Systems

OSD:
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

OSD:
SUSE Linux Enterprise Server 12
SUSE Linux Enterprise Server 11
Red Hat RHEL 7
Red Hat RHEL 6

Operating system

Support requirements
using two ports per CHPID

Support requirements
using one port per CHPID

Operating
system

Support requirements
using two ports per CHPID

Support requirements
using one port per CHPID

z/OS

OSC, OSD, OSE, and OSN

V1R12

OSC, OSD, OSE, OSM, and OSN

z/VM

OSC, OSD

a

, OSE, and OSN

b

: z/VM

V6R2

OSC, OSD, OSE, OSM

V6R2

z/VSE

OSC, OSD, OSE, and OSN

V5R1

OSC, OSD, OSE, and OSN

: z/VSE V5R1

z/TPF

OSD, OSC, OSN

: z/TPF V1R1

OSD, OSC, OSN

: z/TPF V1R1

IBM
zAware

OSD

OSD

«
...
298
299
300
301
302
...
»

Summary of Contents for z13s













































































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for z13s

Brand: Oki Pages: 121

Brand: Oki Pages: 4

Brand: ExtraHop Pages: 5

Brand: LaCie Pages: 22

eServer BladeCenter HS40 Type 8839

Brand: IBM Pages: 120

Brand: TYAN Pages: 106

Brand: Qeedji Pages: 58

Brand: disguise Pages: 12

PRIMERGY CX400 M6

Brand: Fujitsu Pages: 209

PRIMERGY CX272 S1

Brand: Fujitsu Pages: 234

Primergy CX270 S2

Brand: Fujitsu Pages: 320

Primergy CX270 S2

Brand: Fujitsu Pages: 56

Brand: HP Pages: 94

Integrity rx5670

Brand: HP Pages: 46

Brand: HP Pages: 98

NetServer AA 4000

Brand: HP Pages: 82

Brand: HP Pages: 25

HPE ProLiant ML30 Gen9

Brand: HP Pages: 112

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands