IBM ServeRAID, User Reference

Page: 160 / 226

4. Insert the new controller into a PCI slot. If possible, use the PCI slot in which
the old controller was inserted.
5. Attach the SCSI cables to the new controller.
Note: If the new controller has the same number of channels as the old
controller, attach storage devices to the same channels as used
previously.
6. Insert the IBM ServeRAID Support CD into the server CD-ROM drive, and turn
on the server. The IBM ServeRAID ROM Update Wizard automatically starts.
If the BIOS and firmware code do not require updating, the wizard
automatically stops, and the ServeRAID Manager starts. Go to step 7.
If necessary, update the BIOS and firmware code for the new controller. Leave
the
IBM ServeRAID Support CD in the CD-ROM drive; shut down and start the
server.
7. After the ServeRAID Manager program starts, click the new controller in the
left pane.
8. Click Actions
→
Restore to factory-default settings .
9. Click Actions → Copy configuration from drives .
10. Shut down the server, and remove the IBM ServeRAID Support CD from the
CD-ROM drive.
11. Restart the server.
144
IBM ServeRAID: User’s Reference, Version 5.10