IBM ServeRAID User Reference Download Page 90

Page: 90 / 226

3. If your CD-ROM drive automounts, go to step 4. Otherwise, mount the CD-ROM

drive. From the console, type the following and press Enter:

mount -r -t iso9660 /

dev

cdromdevicefile

mountpoint

where

cdromdevicefile

is the specific device file for the CD-ROM block device,

and

mountpoint

is the specific mount point of the Linux system.

4. Copy IPSSEND to your hard disk. Type the following and press Enter:

cp /

mountpoint

/linux/cmdline/ipssend /usr/bin

where

mountpoint

is the specific mount point of the Linux system.

5. Change the access permissions. Type the following and press Enter:

chmod 700 /usr/bin/ipssend

6. Unmount the CD-ROM drive. Type the following and press Enter:

umount /

mountpoint

where

mountpoint

is the specific mount point of the Linux system.

7. Remove the CD from the CD-ROM drive.

Installing IPSSEND for Linux from diskette

Complete the following steps to install IPSSEND using the

IBM ServeRAID Support

diskette for your Linux operating system:

1. Start the server.

2. After the operating system starts, insert the appropriate

IBM ServeRAID Support

diskette into the diskette drive.

3. Mount the diskette drive. From the console, type the following and press Enter:

mount -t msdos /dev/

diskettedevicefile

mountpoint

where

diskettedevicefile

is the specific device file for the diskette drive block

device, and

mountpoint

is the specific mount point of the Linux system.

4. Copy IPSSEND to your hard disk. Type the following and press Enter:

cp /

mountpoint

/ipssend /usr/bin/ipssend

where

mountpoint

is the specific mount point of the Linux system.

5. Unmount the diskette drive. Type the following and press Enter:

umount /

mountpoint

where

mountpoint

is the specific mount point of the Linux system.

6. Remove the

IBM ServeRAID Support

diskette from the diskette drive.

Installing IPSSEND for OpenServer

You can install this program for OpenServer using either the

IBM ServeRAID

Support

CD or the

IBM ServeRAID Support for SCO OpenServer

diskette.

Installing IPSSEND for OpenServer from CD

Complete the following steps to install IPSSEND for OpenServer using the

IBM

ServeRAID Support

CD:

1. Start the server.

2. After the operating system starts, insert the

IBM ServeRAID Support

CD into the

CD-ROM drive.

IBM ServeRAID: User’s Reference, Version 5.10

Summary of Contents for ServeRAID


































































































































































































































Search results

Summary of Contents for ServeRAID

Reviews:

Related manuals for ServeRAID

Brands by name

Popular brands

IBM ServeRAID, User Reference

Search results

Summary of Contents for ServeRAID

Reviews:

Related manuals for ServeRAID

Brands by name

Popular brands