IBM ServeRAID User Reference Download Page 195

Page: 195 / 226

Appendix A. Creating ServeRAID diskettes

Images for the following diskettes are in the \DISKETTE directory of the

IBM

ServeRAID Support

CD. Each of the operating-system specific diskettes contains

device drivers and the IPSSEND utility.

Note:

The IPSMON utility is available only on the

IBM ServeRAID Support for

Novell NetWare

diskette.

Diskette image

Diskette

biosfw1.img

IBM BIOS and Firmware Update (1 of 3)

for the ServeRAID-5i controller

biosfw2.img

IBM BIOS and Firmware Update (2 of 3)

for the ServeRAID-4H,

ServeRAID-II, ServeRAID on-board, and the ServeRAID controllers

biosfw3.img

IBM BIOS and Firmware Update (3 of 3)

for the ServeRAID-4M,

ServeRAID-4Mx, ServeRAID-4L, ServeRAID-4Lx, ServeRAID-3H, and
ServeRAID-3L controllers

failover.img

IBM ServeRAID Failover Support for Windows NT and Windows 2000

clusnt.img

IBM ServeRAID Cluster Solution for Windows NT and Windows 2000

winsrv.img

IBM ServeRAID Support for Windows 2000 Server

winpro.img

IBM ServeRAID Support for Windows (Professional Editions)

for

Microsoft Windows XP Professional and Microsoft Windows 2000
Professional

os2.img

IBM ServeRAID Support for OS/2

winnt.img

IBM ServeRAID Support for Windows NT 4.0

netware.img

IBM ServeRAID Support for Novell NetWare

openunix.img

IBM ServeRAID Support for Caldera UnixWare and Open UNIX

openserv.img

IBM ServeRAID Support for SCO OpenServer

redhat1.img

IBM ServeRAID Support for Red Hat Linux (1 of 2)

for Red Hat Linux,

versions 6.2 and 7.0

redhat2.img

IBM ServeRAID Support for Red Hat Linux (2 of 2)

for Red Hat Linux,

versions 7.1, 7.2, and 7.3

caldera1.img

IBM ServeRAID Support for Caldera OpenLinux (1 of 2)

for Caldera

OpenLinux, version 3.1

caldera2.img

IBM ServeRAID Support for Caldera OpenLinux (2 of 2)

for Caldera

OpenLinux, version 3.1.1

suse.img

IBM ServeRAID Support for SuSE Linux

turbo.img

IBM ServeRAID Support for Turbolinux

dos.img

IBM ServeRAID Support for DOS

179

Summary of Contents for ServeRAID


































































































































































































































Search results

Summary of Contents for ServeRAID

Reviews:

Related manuals for ServeRAID

Brands by name

Popular brands

IBM ServeRAID, User Reference

Search results

Summary of Contents for ServeRAID

Reviews:

Related manuals for ServeRAID

Brands by name

Popular brands