IBM ServeRAID, User Reference

Page: 115 / 226

Starting the ServeRAID Manager program in OpenServer, UnixWare,
Open UNIX, and Linux
Complete the following steps to start the ServeRAID Manager program in
OpenServer, UnixWare, Open UNIX, or Linux:
Note: Ensure that you have superuser privileges before starting these procedures.
1. To change to the directory where you installed the ServeRAID Manager
program, type one of the following:
For OpenServer
cd /opt/RaidMan
For UnixWare and Open UNIX
cd /opt/RaidMan
For Linux
cd /usr/RaidMan
2. Press Enter.
3. Type the following and press Enter:
sh RaidMan.sh
4. The ServeRAID Manager program opens, and a window similar to that shown in
Figure 31 appears.
Note: (UnixWare and Open UNIX only) When installed on UnixWare or Open
UNIX, the ServeRAID Manager program might list the installed ServeRAID
controllers in a different order than the ServeRAID Manager program in
startable-CD mode. To identify a specific controller, refer to its physical slot
number.
Chapter 10. Installing and starting the ServeRAID Manager program
99