IBM ServeRAID User Reference Download Page 14

Page: 14 / 226

Diskette images

Use these images to create the ServeRAID diskettes. These diskettes include the
following:

IBM ServeRAID BIOS and Firmware Update (1 of 3)

diskette

IBM ServeRAID BIOS and Firmware Update (2 of 3)

diskette

IBM ServeRAID BIOS and Firmware Update (3 of 3)

diskette

IBM ServeRAID Failover Support for Windows NT 4.0 and Windows 2000

diskette

IBM ServeRAID Cluster Solution for Windows NT 4.0 and Windows 2000

diskette

IBM ServeRAID Support for Windows 2000 Server

diskette

IBM ServeRAID Support for Windows (Professional Editions)

diskette

IBM ServeRAID Support for Windows NT 4.0

diskette

IBM ServeRAID Support for IBM OS/2

diskette

IBM ServeRAID Support for Novell NetWare

diskette

IBM ServeRAID Support for Caldera UnixWare and Open UNIX

diskette

IBM ServeRAID Support for SCO OpenServer

diskette

IBM ServeRAID Support for Red Hat Linux (1 of 2)

diskette

IBM ServeRAID Support for Red Hat Linux (2 of 2)

diskette

IBM ServeRAID Support for Caldera OpenLinux (1 of 2)

diskette

IBM ServeRAID Support for Caldera OpenLinux (2 of 2)

diskette

IBM ServeRAID Support for SuSE Linux

diskette

IBM ServeRAID Support for Turbolinux

diskette

IBM ServeRAID Support for DOS

diskette

These files are available in the

:/DISKETTE directory, where

is the CD-ROM

drive.

For instructions on creating the diskettes, see Appendix A, “Creating ServeRAID
diskettes” on page 179.

ServeRAID files needed to install Microsoft Cluster Server (MSCS)

Note:

The IBM ServeRAID Cluster Solution requires either Windows 2000 or
Windows NT 4.0.

These files are available in the following directory:

operatingsystem

/CLUSTER

where

is the CD-ROM drive and

operatingsystem

is the specific operating system

used in the ServeRAID installation.

ServeRAID publications

The following books are available in Portable Document Format (PDF) on the

IBM

ServeRAID Support

CD in the /BOOKS directory:

IBM ServeRAID User’s Reference, Version 5.10

(SRAID51.PDF)

IBM ServeRAID Device Driver Installation Instructions

(DEVDRV51.PDF)

xiv

IBM ServeRAID: User’s Reference, Version 5.10

Summary of Contents for ServeRAID


































































































































































































































Search results

Summary of Contents for ServeRAID

Reviews:

Related manuals for ServeRAID

Brands by name

Popular brands

IBM ServeRAID, User Reference

Search results

Summary of Contents for ServeRAID

Reviews:

Related manuals for ServeRAID

Brands by name

Popular brands