IBM ServeRAID, User Reference

Page: 184 / 226

v Unattended mode setting
This setting is configured automatically as Enabled when a controller is set up for
clustering.
If the ServeRAID controller you are replacing is functional, you can obtain the
above configuration information by starting your server with the IBM ServeRAID
Support CD in the CD-ROM drive and using the ServeRAID Manager program.
Note: The configuration information is also available in the printable configuration
file you might have saved when configuring the ServeRAID controllers for
clustering.
If the ServeRAID controller is not functional, you will need to refer to a record of the
settings that was made when the controller was previously configured. If you do not
have a record of the configuration information, see “Obtaining the current
configuration information” for information that might help you to assign the proper
values.
Obtaining the current configuration information
To obtain the SCSI initiator IDs, controller name, partner name, and stripe-unit size
from the corresponding cluster partner controller, complete the following steps:
1. Click Start → ServeRAID Manager .
or
Start the cluster partner system with the IBM ServeRAID Support CD in the
CD-ROM drive. The ServeRAID Manager program starts.
2. In the ServeRAID Manager tree, click the cluster partner controller.
3. Click ( Configure for clustering ) on the toolbar. The “Configure controller
for clustering” window opens.
4. Note the settings in the fields.
5. To determine stripe-unit size, refer to the information displayed in the right pane
of ServeRAID Manager.
Figure 46. “Configure controller for clustering” window
168
IBM ServeRAID: User’s Reference, Version 5.10