IBM ServeRAID, User Reference

Page: 133 / 226

14. Click (
Configure for clustering
) on the toolbar. The “Configure for
clustering” window opens.
15. Select the Shared check boxes for all the logical drives.
16. Do not change the merge-group number from the default that is provided.
17. Record the controller name, partner name, and merge-group numbers, and
store them in a safe place. You will need this information to recover the
configuration if the ServeRAID controller fails.
Note: You can save this information to a file by using the ServeRAID Manager
program:
a. In the ServeRAID Manager tree, click the server.
b. Click Actions
→
Save printable configuration .
18. Click OK .
19. To exit the ServeRAID Manager program, click File
→
Exit .
20. Click Shutdown or Restart .
21. Remove the IBM ServeRAID Support CD from the CD-ROM drive.
22. Continue with Chapter 14, “Installing the Microsoft Cluster Server software” on
page 119.
Figure 39. “Configure for clustering” window
Chapter 13. Configuring ServeRAID controllers for clustering
117