Home
/
IBM
/
ServeRAID
/
User Reference

IBM ServeRAID, User Reference

Share

Page: 170 / 226

background image

BCS

ECS

Explanation

Action

07

0C

Online/rebuild drives are not responding,
and a drive was found at the incorrect SCSI
ID.

To correct the problem:

1. To keep the previous configuration in the

controller, replace the physical drives and
cable connections that were switched or
moved; then, press F4 to retry.

Note:

Pressing F4 might not correct the

problem. If you do not return the drives and
cables to the previous configuration, the
message might return.

2. If all the physical drives are present and

connected correctly, one or more of the drives
might be defective. Identify and replace the
defective drives; then, press F5 to accept the
changes.

3. To modify the configuration and accept the

rearrangement of the physical drives, press
F6.

To exit without making changes, press F10.

07

1C

Online/rebuild and hot spare/standby
hot-spare drives are not responding, and a
drive was found at the incorrect SCSI ID.

07

2C

Online/rebuild and ready/standby drives are
not responding, and a drive was found at
the incorrect SCSI ID.

07

3C

Online/rebuild, ready/standby, and hot
spare/standby hot-spare drives are not
responding, and a drive was found at the
incorrect SCSI ID.

07

4C

Online/rebuild drives are not responding,
and a drive was found at the incorrect SCSI
ID, and unidentified drives were found.

07

5C

Online/rebuild and hot spare/standby
hot-spare drives are not responding, a drive
was found at the incorrect SCSI ID, and
unidentified drives were found.

07

6C

Online/rebuild and ready/standby drives are
not responding, a drive was found at the
incorrect SCSI ID, and unidentified drives
were found.

07

7C

Online/rebuild, ready/standby, and hot
spare/standby hot-spare drives are not
responding, a drive was found at the
incorrect SCSI ID, and unidentified drives
were found.

07

18

Online/rebuild and hot spare/standby
hot-spare drives are not responding.

To correct the problem:

1. To keep the previous configuration in the

controller, replace the physical drives and
cable connections that were switched or
moved; then, press F4 to retry.

2. If all the physical drives are present and

connected correctly, one or more of the drives
might be defective. Identify and replace the
defective drives; then, press F5 to accept the
changes.

To exit without making changes, press F10.

07

28

Online/rebuild and ready/standby drives are
not responding.

07

38

Online/rebuild, ready/standby, and hot
spare/standby hot-spare drives are not
responding.

07

48

Online/rebuild drives are not responding,
and unidentified drives were found.

07

58

Online/rebuild and hot spare/standby
hot-spare drives are not responding, and
unidentified drives were found.

07

68

Online/rebuild and ready/standby drives are
not responding, and unidentified drives were
found.

07

78

Online/rebuild, ready/standby, and hot
spare/standby hot-spare drives are not
responding, and unidentified drives were
found.

09

00

No error occurred.

No action is required. Press F10 to exit without
making any changes.

154

IBM ServeRAID: User’s Reference, Version 5.10

«
...
168
169
170
171
172
...
»

Summary of Contents for ServeRAID



































































































































































































































Reviews:

No comments

Related manuals for ServeRAID

Brand: Hankscraft Runxin Pages: 53

Brand: Calpeda Pages: 4

Brand: UCS Pages: 4

xPico 200 Series

Brand: Lantronix Pages: 7

Brand: Lantronix Pages: 3

Brand: Lantronix Pages: 15

Brand: Parker Pages: 21

Brand: Parker Pages: 26

Brand: Parallax Pages: 3

Brand: Vageo Pages: 2

Brand: DigiPower Pages: 27

RDS17S-ELITE1-R1

Brand: D&R ELECTRONICS Pages: 12

iDual A E27 iD60

Brand: jedi LIGHTING Pages: 23

Brand: Monster Central Pages: 13

Brand: Rain Bird Pages: 18

Brand: SMC Networks Pages: 15

Brand: Bard Pages: 102

Brand: Vestil Pages: 6

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands