Home
/
IBM
/
ServeRAID
/
User Reference

IBM ServeRAID, User Reference

Share

Page: 168 / 226

background image

BCS

ECS

Explanation

Action

01

08

No configuration was found in drives, or the
online/rebuild drives are not responding.

To correct the problem:

1. If the controller is connected to an enclosure,

verify that the enclosure is on. If the enclosure
is off, turn on the power and press F4 to retry.

2. Verify that all the physical drives are present.

If any drives are missing, replace the drives
and press F4 to retry.

3. Verify that all the physical drives are

connected to the controller correctly. If any
drives are unconnected, connect the drives
and press F4 to retry.

4. If all the physical drives are present and

connected correctly, one or more of the drives
might be defective. Identify and replace the
defective drives; then, press F5 to accept the
changes.

5. If you have intentionally switched physical

drives that are connected to this controller,
press F7 to import the configuration from the
drives and account for the drive
rearrangement.

To exit without making changes, press F10.

01

18

No configuration was found in drives, or the
online/rebuild and hot spare/standby
hot-spare drives are not responding.

01

28

No configuration was found in drives, or the
online/rebuild and ready/standby drives are
not responding.

01

38

No configuration was found in drives, or the
online/rebuild, hot spare/standby hot-spare,
and ready/standby drives are not
responding.

01

48

No configuration was found in drives, or the
online/rebuild drives are not responding and
unidentified drives were found.

01

58

No configuration was found in drives, or the
online/rebuild and hot spare/standby
hot-spare drives are not responding and
unidentified drives were found.

01

68

No configuration was found in drives, or the
online/rebuild and ready/standby drives are
not responding and unidentified drives were
found.

01

78

No configuration was found in drives, or the
online/rebuild, hot spare/standby hot-spare,
and ready/standby drives are not responding
and unidentified drives were found.

152

IBM ServeRAID: User’s Reference, Version 5.10

«
...
166
167
168
169
170
...
»

Summary of Contents for ServeRAID



































































































































































































































Reviews:

No comments

Related manuals for ServeRAID

Brand: Saitek Pages: 4

Brand: Caen Pages: 20

Brand: Hama Pages: 17

Brand: IBC Pages: 8

Brand: Sunnen Pages: 24

Brand: Ban Seok Pages: 9

Total Access 351 Series

Brand: ADTRAN Pages: 4

Brand: Viking Pages: 4

GA Figure 220-D

Brand: Vag Pages: 6

Brand: HEIDENHAIN Pages: 257

SensoTimer ST6 Duo eco!ogic

Brand: Kärcher Pages: 96

Brand: Blucave Pages: 2

Brand: Radionics Pages: 18

Brand: Renogy Pages: 36

Brand: Peg-Perego Pages: 68

iEP-5000G Series

Brand: ASROCK Pages: 2

Brand: Runxin Pages: 4

Brand: CALEFFI Pages: 10

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands