IBM ServeRAID, User Reference

Page: 137 / 226

7. On Server A, run IPSHAHTO.EXE again, so that Server A regains control of all
shared logical drives.
8. On Server A, install the Microsoft Cluster Server (MSCS) software.
Note: The directory name and path where the MSCS software is installed
must be the same on both servers.
Complete the following steps to start the installation.
Important
You must use the localquorum option when installing the Microsoft Cluster Server (MSCS)
software with ServeRAID controllers.
a. Insert the Windows NT Server Enterprise Edition Component CD into the
CD-ROM drive on Server A.
b. At the command line, type the following and press Enter:
e :\MSCS\CLUSTER\I386\SETUP /localquorum
where e is the CD-ROM drive letter.
Note: You must type the parameter
localquorum
in lowercase.
c. Install the Microsoft Cluster Server software. Follow the instructions in the
documentation included with the MSCS software.
Server A will restart when the installation is completed.
9. On Server B, make it join the cluster by doing the following.
Note: The directory name and path where the MSCS software is installed
must be the same on both servers.
a. Insert the Windows NT Server Enterprise Edition Component CD into the
CD-ROM drive on Server B. Type the following command (from either a
command line or Add/Remove Programs in the Control panel) and press
Enter:
e :\MSCS\CLUSTER\I386\SETUP
where e is the CD-ROM drive letter.
b. Install the Microsoft Cluster Server software. Follow the instructions in the
documentation included with the MSCS software.
Server B will restart when the installation is completed.
10. Install the IBM ServeRAID Windows NT Cluster Solution program by doing the
following:
a. On Server A, run the utility SETUP.EXE program from the IBM ServeRAID
Cluster Solution for Windows NT and Windows 2000 diskette or IBM
ServeRAID Support CD and follow the instructions that appear on the
screen. At a Windows NT command line, type one of the following and
press Enter:
If installing from CD
e :\winnt\cluster\setup
If installing from diskette
a :\setup
where a is the diskette drive letter and e is the CD-ROM drive letter.
b. When the setup is completed on Server A, run the utility SETUP.EXE
program on Server B.
Chapter 14. Installing the Microsoft Cluster Server software
121