IBM Safenet/400 Reference Manual Download Page 72

Page: 72 / 172

7.2

SafeNet/400

Reference

Guide

V8.50 - May 2008

Testing SafeNet/400 settings based on your historical data with the on-line
transaction tester

This is the preferred method if you would like immediate feedback.

1. From the SafeNet/400 Main Menu select

Option 10 - Go to Special Jobs/Setup Menu

use

GO SN2

command

)

2. Select

Option 10 - On-Line Transaction Testing

or use

PCTESTR

command

The

On-Line Transaction Testing

screen will appear.

If you want, you may enter a beginning date and time, or the user or server ID, then enter
the desired security level to test against your logged transactions.

If you do not enter a date and time, you will be shown requests beginning with the first
available record in the file.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands