IBM Safenet/400 Reference Manual Download Page 97

Page: 97 / 172

10.3

SafeNet/400

Reference

Guide

V8.50 - May 2008

Error Message Received on the Client

If you receive an error message indicating a problem with a client or a communications request,
or an exit program rejection and

SafeNet/400

is active:

Check the request log for a ‘REJECTED’ response

1. Use the date and time along with the user ID to find the request that was rejected. Use

PCREVIEW

or check the Security Report.

2. When you find the request that was rejected, the log will indicate the reason for the

rejection. You will find a list of error codes and their descriptions at the end of this
chapter.

3. If you need to make changes to authorities you can test your changes with the on-line

transaction program before you implement them. See Chapter 7 in this guide, ‘Testing
your Security Settings.’

If the request does not appear in the log or the Review screen

These steps should help you determine if the problem is network related, client related or

SafeNet/400

related.

1. Try the same request with a user ID that has rights to all servers and has all object and all

folder authority. User profile QSECOFR is set up with all rights in

SafeNet/400

default.

2.  Check the log file for the request and response.

3.  Make changes to authorities if necessary.

4.  Try the request again with the original client or with the on-line transaction program.

5.  Try a different client or user ID.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands