IBM Safenet/400 Reference Manual Download Page 74

Page: 74 / 172

7.4

SafeNet/400

Reference

Guide

V8.50 - May 2008

4. When you press

ENTER

and a transaction that meets your selection criteria is found, the

On-

Line Transaction Testing Mode

screen is displayed.

This describes:

•

The Requested Security Level setting to check

•

The current Security Level for the server

•

The maximum security level setting for this server

•

The user making the request

•

The group profile related to the user

•

The date and time of the request

•

The OS/400 server job name the request came from

•

The format

•

The server function receiving the request

•

Data used, if any

•

Whether the request was accepted or rejected, and the reason for the rejection

•

If it is displayed as a valid function key, you can

press F10

to view even more

detail.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

IBM Safenet/400, Reference Manual, Page: 74 / 172

Search results

Summary of Contents for Safenet/400

Reviews: