IBM Safenet/400 Reference Manual Download Page 73

Page: 73 / 172

7.3

SafeNet/400

Reference

Guide

V8.50 - May 2008

3. In

the

Security Levels to Check

field:

Type C

(Current) to test transactions with your

present

SafeNet/400

Server Security

Levels

Type H

(Historical) to review the actual status received when the transaction was logged;

no new ‘re-testing’ is performed.

Type F

(Future) to test transactions with your

future

Server

Security Levels. This will

test each selected transaction against the future security setting to determine if your
security control files are set up correctly.

Type 2, 3

for other levels

If you want to test your Time-of-Day controls,

type Y

in Time of Day Check.

If you want to see only rejected requests,

type Y

Show only Rejections

Important:

If you elect to display only rejections, be advised that this may seriously impact
interactive performance. Consider using the

Batch Transaction Test Report

as an

alternative.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

IBM Safenet/400, Reference Manual, Page: 73 / 172

Search results

Summary of Contents for Safenet/400

Reviews: