IBM Safenet/400 Reference Manual Download Page 25

Page: 25 / 172

1.21

SafeNet/400

Reference

Guide

V8.50 - May 2008

Copying an Existing User to Set Up a New User in SafeNet/400

This will allow you to copy the authorities and settings from one user to another within

SafeNet/400

. The new user profile must already exist in OS/400.

From the Special Jobs Menu, select

Option 13 – Copy a User Setup to Another User

use the

CPYSNUSR

command.

The

Copy SafeNet User/Authorities

screen is displayed.

Type the user profile

you are copying from, then

the new profile(s)

to add.

When finished entering all the new profiles, press

ENTER

This will set up the new profile in

SafeNet/400

and return you to the Special Jobs Menu.

Removing a User from SafeNet/400

This option allows you to remove a user’s authorities and settings from

SafeNet/400.

From the Special Jobs Menu select

Option 14 – Remove a User Enrollment from

SafeNet

or use the

RMVSNUSR

command

The

Remove Users from SafeNet

screen appears.

Type the user profile(s)

to remove, then press ENTER.

This will remove the user from

SafeNet/400

and return you to the Special Jobs Menu.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands