IBM Safenet/400 Reference Manual Download Page 75

Page: 75 / 172

7.5

SafeNet/400

Reference

Guide

V8.50 - May 2008

•

Additional command keys are shown when rejections are displayed. These
additional command keys will allow you to work directly with the appropriate
user setting based on the rejection code.

5. You can roll up or down to scroll backward and forward, or you can press

ENTER

to scroll

forward to the next record in the logging file.

At any time you can press

F12

to return and enter a new starting date and time, server or

user, or change the Security Level to check.

Note:

Use this tool to develop and test your initial security settings prior to putting them into

production. You can go back and change the different

SafeNet/400

parameters to see

how they affect each transaction.

Use the additional command keys shown in rejections to immediately make changes to
user settings.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands