IBM Safenet/400 Reference Manual Download Page 44

Page: 44 / 172

3.2

SafeNet/400

Reference

Guide

V8.50 - May 2008

Controlling TELNET Access by IP Address

Set the TELNET server to Level 3 using the

WRKSRV

command.

From the SafeNet/400 Main Menu, select

Option 7 – Work with TCP/IP Address

Security

or use the

WRKTCPIPA

command and enter

*TELNET

as the server to

control

Enter the IP address

in dotted decimal format (i.e., 10.2.2.2)

Use wild card options if desired (10.2.2.x)

Enter A or R

to accept or reject the request

Restricting Access to Specific Device Names

Set the TELNET server to Level 3 using the

WRKSRV

command

2. Use

the

WRKTCPIPA

command to

enter the correct IP address

, then

enter the

device name

to use for this IP address.

You may also use a generic device name by putting an * at the end of the name. If you
use a generic name, up to 99 will be used.

For example:

An entry of AP* would allow devices to be used as AP01 through AP99. The login
process through TELNET will select the next available device name.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

IBM Safenet/400, Reference Manual, Page: 44 / 172

Search results

Summary of Contents for Safenet/400

Reviews: