IBM Safenet/400 Reference Manual Download Page 48

Page: 48 / 172

3.6

SafeNet/400

Reference

Guide

V8.50 - May 2008

Setting up TCP/IP Address Controls

SafeNet/400

allows you to specify which client IP addresses are either accepted or rejected by

the

Telnet

and the

FTP Servers

Turning on TCP/IP Address Checking

To set-up and turn on TCP/IP address checking for the

FTP Server

and

Rexec Server

Type

WRKTCPIPA

*FTPSERVER then

ENTER

Add the IP addresses to the Control Table

Type

CHGFTPSET

then press

Change

Server Source limit by IP Address?

*YES

then

ENTER

Use WRKSRV command and set the *FTPSERVER and/or *REXEC Server exit
point to level 3 or 4.

To set-up and turn on TCP/IP address checking for the

FTP Client:

Type

WRKTCPIPA

*FTPCLIENT then

ENTER

Add the IP addresses to the Control Table

Type

CHGFTPSET

then press

Change

Client Target limit by IP Address?

*YES

then

ENTER

Use WRKSRV command and set the *FTPCLIENT exit point to level 3 or 4.

To set-up and turn on TCP/IP address checking for

TELNET:

Type

WRKTCPIPA

*TELNET then

ENTER

Add the IP addresses to the Control Table

3. Type

WRKSRV

4. Change

the

TELNETON

point to Level 3

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

IBM Safenet/400, Reference Manual, Page: 48 / 172

Search results

Summary of Contents for Safenet/400

Reviews: