manualshive.com logo in svg

IBM Safenet/400, Reference Manual, Page: 167 / 172

Share
Download
IBM Safenet/400 Reference Manual Download Page 167

 

12.47

 

 SafeNet/400 

Reference 

Guide  

 

©

 Copyright 2008 MP Associates of Westchester, Inc. 

 

V8.50  - May 2008 

 

TCP Signon Server 

 

 
Description:  TCP Signon Server - 100

 

 
The signon server provides security for clients that use TCP/IP communications support.  This 
security function prevents access to the System i5 for users with expired passwords or allows 
entry to only specific users.  

 

 
 

Where used:

   

iSeries Access for Windows

 

 

Server Identifier:

 *SIGNON

 

 

Format Name:

 ZSOY0100

 

 

Levels Supported:

 

Basic 

   (Level 

1,2) 

   Intermediate 

  (Level 

3)

 

 

Limitations:

  

None

 

 

Recommended 
Setting:

 

 

Level 1, Log All 

 

Notes:

 

 
1. 

Level 3 requires specific authority to the server function.   

 
2. 

Level 4 is not required or supported.   

 

Summary of Contents for Safenet/400













































































































































































Reviews:

No comments