IBM Safenet/400 Reference Manual Download Page 111

Page: 111 / 172

11.5

SafeNet/400

Reference

Guide

V8.50 - May 2008

Activating SafeNet/400 Alert Notification

1. From the SafeNet/400 Special Jobs Menu select

Option 7 - Change Alert Notification

Status

or use the

CHGNOTIFY

command and

press F4

Type *ON

for parameter

ALERT

to activate alert notification, then

ENTER.

3. Enter

*YES

to receive summarized alerts or

*NO

for detailed alerts.

4. Enter

YES

to receive alerts as e-mail or

*NO

to receive alerts as workstation messages

only.

Your system must be configured for SMTP before e-mails can be used.

Enter the message queue(s) and/or e-mail distribution list(s)

that should receive these

alerts. You can send alerts to both message queues and distribution lists.

The alerts are not sent to message queues in *BREAK mode. To receive these alerts
immediately, make sure the user message queue is in *BREAK mode. (See CHGMSGQ
command in the IBM CL Manual)

6. You can enter

individual e-mail addresses

to receive alerts in addition to, or instead of,

message queues and distribution lists.

Use the ‘+’ sign to enter additional values.

7. Press ENTER to display the parameter to set the

Summarized Alert Interval

If the

Summarized Alerts

parameter is set to

*YES

, you can specify the number of

minutes between alerts. You will receive notification when each interval expires,
indicating the number of rejections since the last notification.

Creating a Distribution List

Use the CRTDSTL command to create a distribution lists for SafeNet/400 alerts.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands