IBM Safenet/400 Reference Manual Download Page 55

Page: 55 / 172

4.5

SafeNet/400

Reference

Guide

V8.50 - May 2008

Setting up for ANONYMOUS FTP

Example

1. Create a user profile on the System i5 called ANONYMOUS, with password *NONE and

user class *USER, and set the Current Library.

2. From the Special Jobs Menu, select

Option 3 - Change Special FTP Server Settings

use

CHGFTPSET

command along with

3. Set the parameters as follows:

•

If you want to allow OS/400 users other than ANONYMOUS to log in through FTP
server set parameter

RLOGON

*YES

•

Enter

ALOGON(*YES)

to allow ANONYMOUS

•

Enter

the library name

to which the user is restricted in parameter

ALIBR

•

Enter

the type of password

you want the user to enter - E-mail or Guest, or both

•

Enter

the OS/400 user profile

in parameter

AUSRPRF

that was

created in Step 1

above (ANONYMOUS)

•

Enter password for the ANONYMOUS user profile in

APWD

parameter

4. Press

ENTER

5. Return to the SafeNet/400 Main Menu

6. Select

Option 1 - Work with Server Security Settings

or use

WRKSRV

command

7. Locate

the

FTP Logon Server

point

8. Change

the

FTP Logon Server

to Level 3

9. Change

the

FTP Server Validation

point to Level 4. If you want to allow for anonymous

logons, you

MUST

set this to Level 4

10. From the SafeNet/400 Main Menu, select

Option 2 -Work with User to Server Security

or use

WRKUSRSRV

command

11. Grant the ANONYMOUS user profile authority to the

FTP Logon

and

FTP Server Request

Validation

server points.

12. From the SafeNet/400 Main Menu, select

Option 3 - Work with User to Object Level

Security

or use

WRKUSROBJ

command

13. Grant the ANONYMOUS user authority to the library entered in step 3 above (Current

Library), and specifically to any objects within the library. Or, enter *ALL for all object
and then assign the required data rights.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

IBM Safenet/400, Reference Manual, Page: 55 / 172

Search results

Summary of Contents for Safenet/400

Reviews: