IBM Safenet/400 Reference Manual Download Page 13

Page: 13 / 172

1.9

SafeNet/400

Reference

Guide

V8.50 - May 2008

5. For

Data Rights,

type an X

under the appropriate level of authority. Place an X for each

data right that applies.

6. For

Existence Rights,

type an X

if this user will be able to create, delete or move an

object.

To assign EXCLUSIONS to objects and/or libraries, give the user no rights by leaving
the

Data Rights

and

Existence Rights

columns blank.

Repeat these steps for each object or group of objects for this user profile.

PageDown

to the next screen if you need more lines.

ENTER

when you have finished keying in all necessary objects and rights.

The

Maintain Authorized Objects by User

screen is refreshed and all the information you

just entered is displayed.

Press F9

to continue to the next step - setting up user authorities to SQL statements.

Reminder:

If you have already entered objects for a particular user, and you are updating their user
to object level security, a list of existing object authorities will be displayed. To add
more,

press F6

. To delete an existing entry,

type 4

in the

Option

column, then

ENTER.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands