IBM Safenet/400 Reference Manual Download Page 34

Page: 34 / 172

2.4

SafeNet/400

Reference

Guide

V8.50 - May 2008

Setting the Server Function Logging Levels

The valid logging levels are:

Logging Level A

Log all transactions

Logging Level R

Log only rejected requests

Logging Level N

logging

As you set up your Server Function logging levels, please remember the following:

If you set the logging level on the Server Function to

NO LOGGING

REJECTIONS,

the

Server Function setting will override the individual user logging level.

If you set the logging level on the Server Function to

ALL

, the individual user logging level

will override the Server Function logging level.

To make sure you are logging transactions correctly, we recommend that when you initially set
up

SafeNet/400

you set the Server Functions to log

ALL

and set the individual user logging

levels to either

ALL

REJECTIONS

Then, after you have had some experience with checking the logs and interpreting the results,
you may want to make changes for specific user and server combinations.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands