IBM Safenet/400 Reference Manual Download Page 10

Page: 10 / 172

1.6

SafeNet/400

Reference

Guide

V8.50 - May 2008

Type 1

in the

Option

column in front of each server this user will have access to.

If they will have access to all the server functions,

select

*ALL ACTIVE SERVERS

To remove access to a particular server, remove the ‘1’ and leave the

Option

column

blank for that server.

Enter

the

Logging Level

for each server.

A = All
R = Rejections only
N = No logging

When you have finished setting up servers for this user, press

ENTER.

5. Enter

the

Job Run Priority

for each server. Do this if you choose to override OS/400 job

priority defaults.

The job priority will be set when the user accesses this server. Valid job priorities are 00
(the default) through 99. A value of 00 indicates no change to the default job priority.

Press

to continue to the next step - setting up user authorities to objects.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

IBM Safenet/400, Reference Manual, Page: 10 / 172

Search results

Summary of Contents for Safenet/400

Reviews: