IBM Safenet/400 Reference Manual Download Page 114

Page: 114 / 172

11.8

SafeNet/400

Reference

Guide

V8.50 - May 2008

Journaling SafeNet/400 Security Files

You may wish to journal all changes made to any of the

SafeNet/400

security files for audit

purposes. Three programs are provided to assist with the journaling process:

1. Call

PCSECLIB/STRSAFEJRN

•

Creates all required journals (SAFENET) in library PCSECLIB

•

Creates journal receiver (SAFE1) in library PCSECLIB

•

Starts journaling on eleven SafeNet/400 control files

2. Call

PCSECLIB/ENDSAFEJRN

•

Stops journaling on the eleven SafeNet/400 control files

3. Call

PCSECLIB/DLTSAFEJRN

•

Deletes all associates journals and journal receivers

Note

: Options 2 and 3 (END and DELETE) require a dedicated System i5 and must be

performed from the system console while the System i5 is in a restricted state.

Although at this time we have not provided any reporting programs for the

SafeNet/400

journals,

we intend to make that report available as a PTF at a future date.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands