IBM Safenet/400 Reference Manual Download Page 27

Page: 27 / 172

1.23

SafeNet/400

Reference

Guide

V8.50 - May 2008

Setting up Time of Day Controls

If you want to exclude users from server functions based on the day of the week or the time of
day, use Time of Day controls.

SafeNet/400

checks authority in the following sequence:

the

authorized

this

time?

User

Specific

Server

*ALL Servers

Group

Specific

Server

*ALL Servers

Supplemental

Group

Specific

Server

*ALL Servers

*PUBLIC

*Specific

Server

*ALL Servers

SafeNet/400

checks until all the tests are passed or until an exclusion rule is encountered.

Note:

In Version 8, Time of Day controls are handled differently than in previous releases of

SafeNet/400. With Version 8, TOD controls are activated at the server level. Use the
WRKSRV command to turn on Time of Day checking on the appropriate servers.

Summary of Contents for Safenet/400



































































































































































Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands

IBM Safenet/400, Reference Manual

Search results

Summary of Contents for Safenet/400

Reviews:

Related manuals for Safenet/400

Brands by name

Popular brands