IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 82 / 192

When you start the ServeRAID Manager installed on the server, the ServeRAID
Manager Main Tree displays a successful failover controller pairing, similar to the
following window.
Before testing your failover environment, allow the auto-synchronization process to
complete. If you test failover on a physical drive during the auto-synchronization
process, failover succeeds, but the drive is blocked. Then, you must use the
ServeRAID Manager to unblock the drive. To verify that auto-synchronization is
complete, check the progress indicator that displays in the status bar of the
ServeRAID Manager window.
For troubleshooting in a failover environment, refer to “Solving problems in a
failover environment” on page 138.
Figure 19. Information mode window showing a failover controller pairing
68
IBM
®
Netfinity
®
User’s Reference: ServeRAID
™
-4H Ultra160 SCSI Controller