IBM Netfinity ServeRAID-4H Ultra160 User Reference Download Page 6

Page: 6 / 192

. . . . . . . . . . . . . . . . . . . . . . 73

ServeRAID considerations. . . . . . . . . . . . . . . . . . . . . 74

Hardware considerations . . . . . . . . . . . . . . . . . . . . 74
Controller considerations . . . . . . . . . . . . . . . . . . . . 74
Array or logical drive considerations . . . . . . . . . . . . . . . . 74

Chapter 6. Updating the ServeRAID BIOS, firmware, and software code

Chapter 7. Configuring ServeRAID controllers for clustering

. . . . . . 79

Configuring the controller for Microsoft Cluster Service using Windows NT 4.0 or

Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . . 79

Configuring the controller for Vinca High Availability for Novell IntranetWare or

Novell High Availability Server

. . . . . . . . . . . . . . . . . . 79

Configuring a controller for clustering . . . . . . . . . . . . . . . . . 80
Configuring ServeRAID arrays and a logical drive . . . . . . . . . . . . 82

Chapter 8. Installing the Microsoft Cluster Service software on Windows

NT 4.0 . . . . . . . . . . . . . . . . . . . . . . . . . . . 85

Installing the Microsoft Cluster Service . . . . . . . . . . . . . . . . 85
Creating a ServeRAID disk resource on a Windows NT 4.0 ServeRAID cluster

Deleting and re-creating a ServeRAID logical drive resource . . . . . . . . 89
Uninstalling MSCS on ServeRAID servers . . . . . . . . . . . . . . . 89
Updating ServeRAID software in an MSCS cluster environment . . . . . . . 90

Step 1: Upgrading the IBM ServeRAID Manager program . . . . . . . . 90
Step 2: Upgrading the IBM ServeRAID Microsoft Windows NT Cluster

Solution. . . . . . . . . . . . . . . . . . . . . . . . . . 90

Step 3: Upgrading the IBM ServeRAID Windows NT device driver . . . . . 91
Step 4: Upgrading the IBM ServeRAID BIOS and firmware. . . . . . . . 91
Step 5: Upgrading the software for the other server in the cluster . . . . . 91

Chapter 9. Installing the Microsoft Cluster Service software on Windows

2000 . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93

Installing the ServeRAID Manager program . . . . . . . . . . . . . . 93
Installing the Microsoft Cluster Service . . . . . . . . . . . . . . . . 93
Creating a ServeRAID disk resource on a Windows 2000 ServeRAID cluster

Deleting and re-creating a ServeRAID logical drive resource . . . . . . . . 98
Upgrading the IBM ServeRAID Cluster Solution from Microsoft Windows NT 4.0

to Windows 2000 . . . . . . . . . . . . . . . . . . . . . . . 98

Uninstalling MSCS on ServeRAID servers . . . . . . . . . . . . . . . 99

Chapter 10. Monitoring and updating an IBM ServeRAID Cluster Solution

101

Checking the ownership of a physical drive . . . . . . . . . . . . . . 101
Adding logical drives to a cluster . . . . . . . . . . . . . . . . . . 102
Validating a cluster . . . . . . . . . . . . . . . . . . . . . . . 103
Viewing merge group numbers and other cluster information

. . . . . . . 105

Chapter 11. Using utility programs . . . . . . . . . . . . . . . . 107
Using the ServeRAID Mini-Configuration program

. . . . . . . . . . . 107

Viewing the controller status

. . . . . . . . . . . . . . . . . . 107

Viewing the configuration. . . . . . . . . . . . . . . . . . . . 108
Using the advanced configuration functions . . . . . . . . . . . . . 108

Using the IPSSEND command-line program . . . . . . . . . . . . . . 110

FlashCopy function (for Windows NT and Windows 2000 only) . . . . . . 110
Server roll-out functions . . . . . . . . . . . . . . . . . . . . 116
Error-recovery functions . . . . . . . . . . . . . . . . . . . . 118
Problem-isolation and debug functions . . . . . . . . . . . . . . . 119

IBM

Netfinity

User’s Reference: ServeRAID

™

-4H Ultra160 SCSI Controller

Summary of Contents for Netfinity ServeRAID-4H Ultra160

































































































































































































Search results

Summary of Contents for Netfinity ServeRAID-4H Ultra160

Reviews:

Related manuals for Netfinity ServeRAID-4H Ultra160

Brands by name

Popular brands

IBM Netfinity ServeRAID-4H Ultra160, User Reference

Search results

Summary of Contents for Netfinity ServeRAID-4H Ultra160

Reviews:

Related manuals for Netfinity ServeRAID-4H Ultra160

Brands by name

Popular brands