IBM Netfinity ServeRAID-4H Ultra160, User Reference

Page: 65 / 192

5. Follow the instructions on the screen to install the program.
Installing on Red Hat Linux 6.1 (or later)
Notes:
1. The ServeRAID Manager program comes with the IBM Java Runtime
Environment (JRE).
2. This version of the ServeRAID Manager program supports up to 8 ServeRAID
controllers when using Linux.
To install the ServeRAID Manager program for Red Hat Linux 6.1 (or later), do the
following.
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. Some operating systems will automount the CD. For those that do not, type:
mount -r/dev/ cdromdevicefile / mountpoint
where mountpoint is the mount point to use (typically /mnt), and cdromdevicefile
is the specific device file for the CD-ROM block device (typically /dev/cdrom).
3. Press Enter; then, type:
rpm --install / mnt /programs/linux/manager/RaidMan-4.00-1.386.rpm
where mnt is the mount point of the device file used in step 2.
4. Press Enter.
5. When the installation is complete, type:
umount /mnt
where mnt is the mount point of the device file used in step 2.
Note: For operating systems that automount the CD, you must first close the
window displaying the files on the CD.
6. Press Enter. You can now remove the CD from the CD-ROM drive.
Installing on OS/2
Note: This version of the ServeRAID Manager program supports up to 8
ServeRAID controllers when using OS/2.
To install the ServeRAID Manager program for OS/2, do the following:
1. Insert the IBM ServeRAID Support CD into the CD-ROM drive.
2. Open an OS/2 command window.
3. Type the following:
d :
where
d
is the CD-ROM drive letter.
4. Press Enter; then, type:
cd \programs\os2\manager
5. Press Enter; then, type:
install
6. Press Enter.
7. The installation program starts. Follow the instructions on the screen to install
the program. On the final installation panel, be sure to specify the location
where you want to install the ServeRAID Manager program.
Chapter 2. Installing and configuring ServeRAID controllers
51